Rotary Axis for 4th-Axis Chuck / Tailstock 100mm


Package Includes:

1 x 4th Axis 100mm chuck 3 Jaw 6:1

1 x Tailstock


SPECS:

Chuck type: 100MM three jaw self-centering chuck

Center Height : 65mm

Total height  : 110MM

Angle : 0.3 degree/step

Reduction ratio : 6:1 (synchronous deceleration mode)

Magnetic stepping motor : Two-phase 57 step motor Four-wire


Fourth axis pulse equivalent settings:

The Mach3 system settings:  the pulses for 1  required:

( the motor 1 Circle of pulse number × the drive of subdivision number × reduction ratio) ÷ 360 degrees

 For example, the two-phase 57 motor, the ubdivision number 16, the reduction ratio 50:1


                      (200 × 16 × 50) ÷ 360 = 444.44444444)


Ncstudio system settings: the angle of a pulse walking:

 360 ÷ (the motor 1 Circle of pulse numberr × × the drive of subdivision number × reduction ratio)

 For example: the two-phase 57 motor, the breakdown of the number 16, reduction ratio 50:1

                      360 ÷ (200 × 16 × 50) = 0.00225


 X or Y axis instead of the algorithm is:

 Circumference ÷ (the motor 1 Circle of pulse numberr × × the drive of subdivision number × reduction ratio)

 Engraving different sizes of round bars, equivalent needs to be set


 

Stepper Motor Specs:

Nema 23   57x76mm

Shaft Diameter : 8 mm

Shaft length : 25.5mm

Step Angle :1.8

Current : 3A

Voltage : 4.2V

Temperature Rise : 80 c max

Ambient Temperature : -20 c--+50 c

Phase No. : 2HP 

Insulation Resistance : 100MOhm(500V DC)

Holding Torque : 18kg.cm

Write a review

Note: HTML is not translated!
    Bad           Good

Rotary Axis for 4th-Axis Chuck / Tailstock 100mm

  • Product Code: 100mm
  • Availability: 2-10 Days
  • R8,499.00

  • Ex Tax: R8,499.00

Related Products

DIY CNC TABLE X Y Z  (2000mm x 1000)

DIY CNC TABLE X Y Z (2000mm x 1000)

EXCLUSIVE TO UNIROBOTICSEverything you need to build your very own XYZ CNC Table!This kit is suitabl..

R38,999.00 Ex Tax: R38,999.00

DIY CNC TABLE X Y Z  (1200mm 1200mm)

DIY CNC TABLE X Y Z (1200mm 1200mm)

This kit is suitable for a 1200mm x 1200mm TableEXCLUSIVE TO UNIROBOTICSEverything you need to build..

R37,500.00 Ex Tax: R37,500.00

Tags: Rotary Axis for 4th-Axis Chuck / Tailstock 100mm